***Only available in Canada***

Larger than life, this gas fireplace is a beautiful addition to any spacious family room to create warmth and luxury.

Relax and enjoy the show
While relaxing from across the room, you can turn on the flame, adjust its intensity, and set the optional light kit to your preference. Also included is an ultra-quiet 260 CFM adjustable speed blower, safety invisimesh screen and black polished glass covering the burner.

The fireplace of your dreams
Create the perfect atmosphere with the many options available to you. Embellished with river rocks, our strikingly realistic log sets are available in driftwood or birch. Also choose from a multitude of interior panels and crushed glass to match your fireplace to the ambiance and style of your room. A regular, large or designed specifically for your masonry wall finishing trim will give your installation a great look. Opt for the modular lighting system to create a cozy atmosphere even when the flames are out.


Available in natural gas (FG00001) or propane (FG00010) versions. Note that the halogen lighting option (AC04336) is not compatible with the sandbox option (AC04371).

GENERAL FEATURES

Gas inlet diameter 1/2″ NPT
Electrical requirement 115V / 60Hz
Maximum altitude allowed Up to 4,500′ (1,370 m)
Efficiency standard CAN/CSA-P.4.1-15 61.77% (NG) | 60.06% (LP)
Pilot type CONTINUOUS | INTERMITTENT
Maximum input (natural gas) 38,000 BTU/h
Maximum input (liquid propane) 34,000 BTU/h
Minimum input (natural gas) 25,000 BTU/h
Minimum input (liquid propane) 27,000 BTU/h
Turn down capacity 34.21% (NG) | 20.59% (LP)
Type of valve PROFLAME II
Thermostatic or manual mode Yes
Ignition type Electronic
Requires electricity No
Vent dimension 5″ x 8″
Fuel type Propane or natural gas
High-efficiency certified appliance Exempt
Electronic igniter Yes
Chimney diameter 8″
Type of chimney Direct vent
Approved for a mobile home installation Yes
Shipping Weight 270 lb (123 kg)
Door type Single, glass with steel frame
Glass type Ceramic glass
Glass surface – dimensions (Width X Height) 48″ X 12 7/8″
Premium quality blower included (CFM) 2 x 130
Overall dimension (Height) 59″
Overall dimension (Width) 78 3/4″
Overall dimension (Depth) 21 3/8″
USA standard (safety) ANSI Z21.88 / CSA 2.33
Canadian standard (safety) ANSI Z21.88 / CSA 2.33
Tested and listed as per applicable standards By an accredited laboratory (CAN/USA)
Warranty Limited lifetime

APPROVED VENTING SYSTEMS

Manufacturiers* Brand Type Diameter
Olympia Chimney/SBI Venting Division Ventis 5″ x 8″
Simpson Duravent DirectVent Pro 5″ x 8″

* Specific components may be required depending on the chimney manufacturer.

Minimum clearances to combustibles*
(Data expressed in inches. 1 inch = 25.4 mm)
Clearance – back wall 3″
Clearance – corner 5 7/16″
Clearance – side wall 8″
Clearance – top (measured from the platform on which the appliance is installed)** 84″
Clearance – combustible side mantle to unit 13″
Clearance – combustible top mantle to unit 24″
Clearance – minimum floor protection under the appliance 0″
Clearance – from the top of the unit to the shelf 21 1/4″

* The information given on the certification label affixed to the appliance always overrides the information published in any other media (owner’s manual, catalogues, flyers, magazines and/or web sites).